Settings

Language, shortcuts & timezone

Language

Timezone

Time zone changes apply on this device. A new device may start at GMT+8; check match times before reading.

本文へスキップ
紹介

設定

設定をカスタマイズする

Why the Same Football Model Can Change on Another Computer

Opta Tips Team による 更新済み

Check software versions, numerical tolerances and decision boundaries when a saved football model produces different outputs on another computer.

Hypothetical computer outputs differ by 0.000002 in home and draw probabilities, changing the leading label from home to draw.

A football forecast can change slightly when the same saved model runs on another computer. The reason may lie in its software versions, numerical precision or calculation backend. A useful check establishes which parts of the process stayed identical, measures the output difference and examines whether that difference changed the published decision.

Football prediction reproducibility across computers therefore needs an agreed comparison rule. Two displays showing 40% can conceal different stored probabilities. Two top-choice labels can disagree even when their underlying distributions are extremely close. The worked examples below are hypothetical and describe an evaluation method.

Specify the execution being compared

Begin with a saved, already trained model and a fixed set of match inputs. Running that artifact on a second computer tests its prediction execution. Training a fresh model introduces another process, with its own optimisation, sampling and stopping choices.

Record which operation was requested. A report saying that the model was rerun should identify whether it loaded existing fitted parameters or estimated them again. Keep the original output and the second output alongside that description.

For a regulation-time 1X2 forecast, preserve the order of home win, draw and away win. A file using a different class order can produce an apparently dramatic disagreement through mislabelled columns. The fixture identifier, forecast cutoff and model artifact identifier should match before any probability comparison begins.

The wider guide to a reproducible football forecast explains how to assemble that evidence. The cross-computer question starts once the intended execution and its original artifacts are identified.

Retain the environment beside the model

A model file is one component of its execution environment. Useful accompanying information includes the programming-language version, prediction-library versions, operating system, processor or accelerator, numerical data type and relevant backend settings. A model conversion also needs the conversion tool and runtime versions.

For persisted scikit-learn models, the official documentation recommends matching package versions between training and serving. Cross-version loading is unsupported, while portability across hardware usually assumes compatible Python and dependency versions. Those qualifications belong beside a portability claim. Scikit-learn model-persistence documentation.

An environment record helps a reviewer explain a difference without guessing which component caused it. Suppose both runs use the same model file, but one uses a newer numerical library. That is a documented environment difference to investigate. Causation requires a controlled comparison that changes the suspected component while preserving the others.

Check the final model inputs

Matching a downloaded data file is useful, then the transformed inputs need checking too. Date parsing, category encoding, feature order and missing-value treatment can change what reaches the model. A raw-file match alone leaves those steps open.

Consider an invented input containing team rating, home advantage and rest days. If one runtime passes the values in a different column order, the saved coefficients can be applied to the wrong quantities. The resulting change may be large even though every value appears somewhere in both files.

Preserve the final feature names, order, data types and a suitable identity check for the transformed array. When a difference appears at this stage, examine preprocessing before attributing it to the processor. A compact review can follow the sequence from raw records to transformed inputs to model outputs and finally the displayed selection.

Understand how numerical differences arise

Computers represent numerical values with finite precision. Reordering calculations can affect rounding, and different calculation backends can use different operation sequences. Hardware changes can therefore expose small output differences even with identical inputs and controlled random behaviour.

PyTorch documents these limitations, including differences between CPU and GPU execution and between batched and individual calculations. Its numerical-accuracy guidance provides a concrete reason to define the required degree of agreement before a portability test. PyTorch numerical-accuracy documentation.

The size and consequence of the discrepancy still need measurement. An explanation involving rounding remains a hypothesis until the execution evidence supports it. Incorrect preprocessing, a different artifact or an altered output transformation can also change a forecast.

A close distribution can change the leading outcome

Imagine a fictional saved forecast for one match. Computer Alder produces a home probability of 0.400001, a draw probability of 0.399999 and an away probability of 0.200000. Computer Birch produces 0.399999, 0.400001 and 0.200000 in the same order. Both distributions sum to one.

The absolute change is 0.000002 for home and draw, with no change for away. On a percentage scale, that is 0.0002 percentage points. The largest component difference is therefore two millionths on the zero-to-one scale.

A rule that always selects the largest stored probability labels Alder’s forecast home and Birch’s forecast draw. The leading two outcomes were separated by only 0.000002 in each run. Their order reversed through a discrepancy of the same size.

A display rounded to whole percentages shows 40%, 40% and 20% for both. Readers need the underlying values and selection rule to understand the different labels. This example demonstrates a possible boundary effect. It supplies no evidence about any actual football model’s numerical stability.

Choose the tolerance before inspecting the result

A tolerance defines how much numerical variation the comparison accepts. An absolute tolerance applies a fixed allowance on the chosen scale. A relative tolerance scales part of the allowance to a reference value. State both settings and preserve the reference output.

NumPy’s allclose comparison checks whether the absolute difference is at most the absolute tolerance plus the relative tolerance multiplied by the absolute reference value. The reference position matters because this rule is asymmetric. NumPy also cautions that its default absolute tolerance can be unsuitable near zero. NumPy allclose reference.

For the fictional pair above, an explicitly chosen absolute tolerance of 0.000003 and zero relative tolerance accepts every component difference. The same pair exceeds an absolute tolerance of 0.000001. These invented settings illustrate the arithmetic. A real protocol needs a tolerance justified by its numerical method and use.

Record shape and class-order checks separately. A comparison also needs an explicit policy for missing or non-finite values. Increasing the allowance after seeing a failed comparison changes the acceptance rule, so retain the original result and explain any revised protocol.

Evaluate decision stability alongside probability agreement

The tolerance result and the selection result answer different reader questions. In the example, the probability components pass the looser numerical check while the leading-outcome label changes. A complete report records both observations.

Check any threshold used to publish or withhold an output. Suppose a separate hypothetical policy publishes a home selection when its stored probability reaches 0.60. Outputs of 0.599999 and 0.600001 differ by 0.000002, yet lie on opposite sides of that rule.

The policy needs to specify its comparison operator, tie handling and whether rounding occurs before selection. Developers may choose a declared boundary band that triggers review, but its width and treatment should be fixed before examining evaluation outcomes. Retain how many forecasts entered that band and what happened to them.

The observed match result offers no basis for selecting the more convenient computer output afterward. Preserve the original publication and attach the portability finding to its record.

Keep the comparison aligned when processing many matches

Match the outputs by stable fixture identifier. A changed row order can create false differences if the first probability row is compared with a different match. Retain any unavailable output as its own status so that the comparison population remains visible.

Also record batch size when it can affect the execution. A daily file processed in one batch and the same fixtures processed individually can follow different numerical paths. A reviewer can compare these modes deliberately and retain the largest difference, affected fixtures and any changed selections.

For a fictional hundred-fixture check, suppose ninety-nine distributions meet the declared tolerance and one exceeds it. Report the single exception and its magnitude. An average across all hundred can conceal the particular forecast that needs investigation.

Separate portability findings from random variation

A controlled second-computer test should preserve the recorded random settings where relevant. If the process also retrains, changing the random sequence creates another source of variation. The companion explanation of random seeds in football forecast reruns follows that question in detail.

A practical diagnostic can first repeat execution in the original environment, then move the preserved artifact and inputs to the second environment. Stable original repeats give a clearer reference for interpreting the move. Variation within the original setup remains part of the evidence and needs its own investigation.

For a published comparison, retain the environment record, artifact and input identities, tolerance specification, per-fixture differences and decision changes. Access restrictions can limit independent reproduction. A reviewer should state exactly which materials were available and which checks were completed.

State the portability finding at its measured scope

A precise conclusion might say that a saved model produced distributions within a declared tolerance on a named fixture set across two recorded environments, with two leading-outcome changes near ties. Another test might establish exact output agreement. Each conclusion needs its own retained comparison.

Forecast quality requires a further evaluation against later observed outcomes on an appropriate sample. Portability evidence contributes a narrower fact about how the recorded computation behaves. Keeping the numerical result, published decision and evaluation record together allows readers to follow each claim back to the process that produced it.

読者による議論

コメント 0

まだコメントはありません。

コメントを残す

Your email address will not be published. Required fields are marked *